SY-GPON-4010-WADONT
SY-GPON-4010-WADONT
SY-GPON-4010-WADONT
Product Descripon :
GE + 1 POTS AC WiFi XPON HGU terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature technology whic h have high ratio of performance to price, and the technology of IEEE802.11b/g/n/ac WiFi, Layer 2/3,. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah ITU-T G.984.x and technical requirement of GPON Equipments.
LED Indicators: PON interface 1 G/EPON port(EPON PX20+ and GPON Class B+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface 4×10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, Rj45 connector Wireless Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400- 2.483GHz 5.0GHz Operating frequency: 5.150- 5.825GHz
Support MIMO: 2T2R,5dBi external antenna, rate up to 1.167Gbps Support: multiple SSID TX power: 11n–22dBm/11ac–24dBm
POTS interface :1×FXS, RJ11 connector
Support: G.711/G.723/G.726/G.729 codec Support T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909
USB interface :USB3.0 LED 12, For Status of PWR, PON, LOS, WAN, WiFi, FXS, ETH1~4, WPS, USB. Operating condition Temperature: 0℃～+50℃ Storing condition Humidity: 5%-90% (non-condensing) Power supply DC 12V,1/1.5A Power consumption ≤10W
Dimension 205mm×140mm×37mm(L×W×H)
Net weight 0.34Kg
LED Indicators: Power PWR On The device is powered up. Off The device is owe red down on The device is registered to the GPON system Registration PON off Device is not registered to the GPON system. Blink Device is registering Optical signal LOS Blink Device does not receive optical signals. Off Device has received optical signals.
WAN WAN On WAN is effective Off WAN is ineffective On Device has registered to the soft-switch, but without ongoing data transmission
POTS FXS Off Device is power off or registered to the soft-switch. Blink Phone hooks offor the port is with ongoing data transmission.
Ethernet ETH1~ETH4 On Port is connected properly Off Port connection exception or not connected. Blink Port is sending or/and receiving data.
On WPS client is connected. ( LED turn off after 5minutes of successful connection) Pair WPS Off Does not use WPS or WPS client is connected.( LED turn off after 5 minutes of successful connection) Blink WPS client is connecting On USB device is connected, but Interface Description without ongoing data transmission. USB USB Off Device is power off or USB device is not connected Off USB is with ongoing data transmission.
